Thermo-Elastic Distortion Measurement


Thermo-Elastic Distorsion Measurement

  • Measuring the deformation of a specimen in extreme conditions of use

The measurement principle is the videogrammetry with 1 or 2 cameras.

These tests can be performed between - 160 ° C to + 110 ° C under vacuum.

Our test facilities

  • A box "SIMDIA", equipped with a rotation system dedicated to equipment of 1.2m diameter.
  • The room "SIMLES" equipped with its system of rotation (SIMAT) dedicated to measure specimens of about 4m diameter with the ability to set up two cameras.
  • A vacuum 27m3 or can be measured in specimens of 2.8 m in diameter.

2, rond point Guillaumat CS 64356 31029 Toulouse Cedex